Per accedir als documents amb el text complet, si us plau, seguiu el següent enllaç: http://hdl.handle.net/2117/7850
Títol:
|
Two-Dimensional Communication of Networked Devices Through a Single Conductive Surface
|
Autor/a:
|
Rius Vázquez, José
|
Altres autors:
|
Universitat Politècnica de Catalunya. Departament d'Enginyeria Electrònica; Universitat Politècnica de Catalunya. QINE - Disseny de Baix Consum, Test, Verificació i Circuits Integrats de Seguretat |
Abstract:
|
This paper shows the possibility of two-dimensional
communication between electronic devices by using only one
conductive surface. An analysis of the expected magnitude of the
signal at the reception point as a function of distance and
electrical parameters of the conductive surface is presented.
Measurements on surfaces from 0.4 to 2.56 m2 and with sheet
resistances from 77 to 1462 ohm/square prove the correctness of
this analysis. In addition, practical rules to locate and orient the
transceivers are given. Prototype transceivers connected to a
plane with one conductive surface able to communicate at
100Kbit/s at a distance of 2m are described. |
Matèries:
|
-Àrees temàtiques de la UPC::Enginyeria de la telecomunicació::Processament del senyal -Computer networks--Congresses -Data transmission systems -Distributed parameter systems--Congresses -Two-dimensional digital signal processing -Xarxes d'àrea local (Xarxes d'ordinadors) -Dades -- Transmissió |
Drets:
|
|
Tipus de document:
|
Article - Versió publicada Objecte de conferència |
Compartir:
|
|
Mostra el registre complet del document